Cisco 8851 Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Telepon IP Cisco 8851. Cisco 8851 15 halaman. Mpp
Juga untuk Cisco 8851: Catatan Rilis (24 halaman), Panduan Pengguna (16 halaman), Panduan Referensi Cepat (7 halaman), Fitur (16 halaman), Panduan Memulai dengan Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Cepat (2 halaman), Panduan Pengguna (24 halaman), Panduan Referensi Cepat (2 halaman), Panduan Pengguna (20 halaman), Panduan Memulai Cepat (2 halaman), Panduan Pengguna (28 halaman), Panduan Utama Migrasi Firmware (31 halaman), Panduan Pengguna (30 halaman), Panduan Pengguna (29 halaman), Manual (44 halaman), Manual (13 halaman), Manual (14 halaman), Panduan Memulai Cepat (2 halaman), Panduan Instalasi (39 halaman), Manual (5 halaman), Panduan Memulai Cepat (2 halaman), Panduan Singkat (2 halaman), Panduan Referensi Cepat (3 halaman), Panduan Pengguna (11 halaman), Panduan Memulai Cepat (2 halaman), Panduan Konfigurasi Ulang (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Memulai Cepat (6 halaman), Manual (22 halaman), Manual (22 halaman), Panduan Memulai Cepat (2 halaman), Memulai (2 halaman), Manual (48 halaman), Panduan Pengguna (40 halaman), Panduan Referensi Cepat (7 halaman), Mulai Cepat (2 halaman), Panduan Referensi Cepat (8 halaman)

CALL BASICS

You can place a call using any of the following methods:

1. Lift the receiver and dial

2. Hit the Speakerphone

3. Hit the New call Soft Key and dial

You can end a call using any of the following methods:

1. Hang up the receiver

2. Hit the End call Soft Key

3. Hit the red Hang Up button

On-Campus Call – Dial the 4 digit extension of the other party

Local Call – Dial 9 followed by the 7-digit number of the other party

Long Distance Call – Dial 9, then 1, then the area code and phone number of the other party. You will then be prompted to enter

your long distance code (screen shows "Enter Authorization Code") followed by the # key. After doing so, your call will be

connected.

International Call - Dial 9, then 011, then the country code, area code, and phone number of the other party. You will then be

prompted to enter your long distance code (screen shows "Enter Authorization Code") followed by the # key. After doing so, your

call will be connected if you have been granted international dialing privileges.

Emergency Call – Dial either 911 or 9 followed by 911 to connect with your local 911 dispatch center.

You place a call on hold using any of the following methods:

1. Push the Hold

2. Push the Hold Soft Key

You can resume a call on hold using any of the following methods:

1. Push the Hold

2. Push the Resume Soft Key

Hit the "More" Soft Key (...) and then the Park Soft Key

When you park a call, you will be notified which extension is holding the call (for example, the screen will say "Parked at 1850".)

Anyone can retrieve a parked call by simply dialing the park number (for example, 1850) from any phone on the Cisco phone system.

When your phone is ringing, you will have a Soft Key option called Decline. Hitting this Soft Key immediately directs the call to

voicemail. This is similar to hitting "ignore" on most cell phones.

CISCO PHONE GUIDE 8851

button and dial

Button

| Rev 5 - 3/2016

TIP: Dial * and then the on-

campus extension to go directly

to a user's voicemail.