Cisco 8945 Manual de administración - Página 15

Navegue en línea o descargue pdf Manual de administración para Teléfono IP Cisco 8945. Cisco 8945 16 páginas. Unified ip standard phone
También para Cisco 8945: Ficha de datos (5 páginas), Manual del usuario (42 páginas), Notas de publicación (16 páginas), Manual del usuario (24 páginas), Inicio rápido (2 páginas), Manual de inicio rápido (4 páginas), Manual del usuario (2 páginas), Manual de inicio rápido (2 páginas), Manual del usuario (8 páginas), Manual del usuario (2 páginas), Manual de consulta rápida (5 páginas), Referencia rápida (2 páginas), Manual del usuario (2 páginas), Manual del usuario (3 páginas), Manual de formación (31 páginas), Características Manual (4 páginas), Vistazo rápido (3 páginas), Manual de referencia (28 páginas), Manual del usuario (20 páginas), Primeros pasos (29 páginas)

Cisco Unified IP Phone Installation

Table 3: LED Diagnostic Status

2 The screen displays the Cisco Systems, Inc., logo screen.

3 This message appears as the phone starts up: Phone not registered

4 The home screen displays:

If the phone successfully passes through these stages, it has started up properly.

Configure Phone Services for Users

You can give users access to Cisco IP Phone Services on the IP phone. You can also assign a button to different

phone services. These services comprise XML applications and Cisco-signed Java midlets that enable the

display of interactive content with text and graphics on the phone. The IP phone manages each service as a

separate application. Examples of services include local movie times, stock quotes, and weather reports.

Before a user can access any service:

• You must use Cisco Unified Communications Manager Administration to configure services that are

• The user must subscribe to services by using the Cisco Unified Communications Self Care Portal. This

Hardware test

Power is Ready

Flash is Accessible

RAM Test Successful

Ethernet Test Successful

• Current date and time

• Primary directory number

• Additional directory numbers and speed dial numbers, if configured (only on Cisco Unified IP Phone

8941)

• Softkeys

not present by default.

web-based application provides a graphical user interface (GUI) for limited, end-user configuration of

IP phone applications. However, a user cannot subscribe to any service that you configure as an enterprise

subscription.

Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 10.0 (SCCP

MWI

Hold

—

Configure Phone Services for Users

Mute

Speaker

—

and SIP)