Cisco 9951 Standard Visión general - Página 29

Navegue en línea o descargue pdf Visión general para Teléfono IP Cisco 9951 Standard. Cisco 9951 Standard 30 páginas. Cisco systems telephone
También para Cisco 9951 Standard: Ficha de datos (7 páginas), Notas de publicación (16 páginas), Manual del usuario (12 páginas), Manual de instalación (4 páginas), Manual de administración (8 páginas), Manual del usuario (48 páginas), Inicio rápido (2 páginas), Manual del usuario (22 páginas), Configurar (4 páginas), Manual de inicio rápido (8 páginas), Manual de inicio rápido (2 páginas), Manual del usuario (23 páginas), (Portugués) Manual de inicio rápido (2 páginas)

Imprimir página
Cisco 9951 Standard Visión general
Chapter 1
An Overview of the Cisco Unified IP Phone
Table 1-10
Installation Checklist for the Cisco Unified IP Phone 8961, 9951, and 9971 (continued)
Task
Purpose
If you choose to deploy the Cisco Unified IP Phone 9971 on a
4.
wireless network, skip to
If you are configuring the ethernet network settings on the phone
for an IP network, you can set up an IP address for the phone by
either using DHCP or manually entering an IP address.
Using DHCP—To enable DHCP and allow the DHCP server to
automatically assign an IP address to the Cisco Unified IP Phone
and direct the phone to a TFTP server, press Applications and
choose Administrator Settings > Network Setup > Ethernet
Setup > IPv4 Setup and:
To enable DHCP, set DHCP Enabled to Yes. DHCP is enabled
•
by default.
To use an alternate TFTP server, set Alternate TFTP Server to
•
Yes, and enter the IP address for the TFTP Server.
Consult with the network administrator to determine
Note
whether you need to assign an alternative TFTP server
instead of using the TFTP server assigned by DHCP.
Without DHCP—You must configure the IP address, subnet mask,
TFTP server, and default router locally on the phone. Press
Applications and choose > Administrator Settings > Network
Setup > Ethernet Setup > IPv4 Setup:
To disable DHCP and manually set an IP address:
Set DHCP Enabled to No.
a.
Enter the static IP address for phone.
b.
Enter the subnet mask.
c.
Enter the default router IP addresses.
d.
Set Alternate TFTP Server to Yes, and enter the IP address for
e.
TFTP Server 1.
You must also enter the domain name where the phone resides.
Press Applications and choose Administrator Settings >
Network Setup> Ethernet Setup.
(Cisco Unified IP Phone 9971 only)
5.
If you choose to deploy the phone on the wireless network, you
must configure the following:
Configure the wireless network.
•
Enable wireless LAN for phones on Cisco Unified
•
Communications Administration.
Configure a wireless network profile on the phone.
•
The wireless LAN on the phone does not activate when
Note
there are ethernet cables connected on the phone.
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.5 (SIP)
OL-20861-01
Task 5.
Overview of Configuring and Installing Cisco Unified IP Phones
For More Information
See the
"Configuring Startup Network
Settings" section on page
See the
"Ethernet Setup Menu" section on
page
7-4.
See
Chapter 6, "Understanding the VoIP
Wireless Network."
3-21.
1-29