Cisco 9951 Standard Vue d'ensemble - Page 29

Parcourez en ligne ou téléchargez le pdf Vue d'ensemble pour {nom_de_la_catégorie} Cisco 9951 Standard. Cisco 9951 Standard 30 pages. Cisco systems telephone
Également pour Cisco 9951 Standard : Fiche technique (7 pages), Notes de mise à jour (16 pages), Manuel de l'utilisateur (12 pages), Manuel de configuration (4 pages), Manuel d'administration (8 pages), Manuel de l'utilisateur (48 pages), Démarrage rapide (2 pages), Manuel de l'utilisateur (22 pages), Mise en place (4 pages), Manuel de démarrage rapide (8 pages), Manuel de démarrage rapide (2 pages), Manuel de l'utilisateur (23 pages), (portugais) Manuel de démarrage rapide (2 pages)

Imprimer la page

Chapter 1

An Overview of the Cisco Unified IP Phone

Table 1-10

Installation Checklist for the Cisco Unified IP Phone 8961, 9951, and 9971 (continued)

Task

Purpose

If you choose to deploy the Cisco Unified IP Phone 9971 on a

wireless network, skip to

If you are configuring the ethernet network settings on the phone

for an IP network, you can set up an IP address for the phone by

either using DHCP or manually entering an IP address.

Using DHCP—To enable DHCP and allow the DHCP server to

automatically assign an IP address to the Cisco Unified IP Phone

and direct the phone to a TFTP server, press Applications and

choose Administrator Settings > Network Setup > Ethernet

Setup > IPv4 Setup and:

To enable DHCP, set DHCP Enabled to Yes. DHCP is enabled

•

by default.

To use an alternate TFTP server, set Alternate TFTP Server to

•

Yes, and enter the IP address for the TFTP Server.

Consult with the network administrator to determine

Note

whether you need to assign an alternative TFTP server

instead of using the TFTP server assigned by DHCP.

Without DHCP—You must configure the IP address, subnet mask,

TFTP server, and default router locally on the phone. Press

Applications and choose > Administrator Settings > Network

Setup > Ethernet Setup > IPv4 Setup:

To disable DHCP and manually set an IP address:

Set DHCP Enabled to No.

Enter the static IP address for phone.

Enter the subnet mask.

Enter the default router IP addresses.

Set Alternate TFTP Server to Yes, and enter the IP address for

TFTP Server 1.

You must also enter the domain name where the phone resides.

Press Applications and choose Administrator Settings >

Network Setup> Ethernet Setup.

(Cisco Unified IP Phone 9971 only)

If you choose to deploy the phone on the wireless network, you

must configure the following:

Configure the wireless network.

•

Enable wireless LAN for phones on Cisco Unified

•

Communications Administration.

Configure a wireless network profile on the phone.

•

The wireless LAN on the phone does not activate when

Note

there are ethernet cables connected on the phone.

Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.5 (SIP)

OL-20861-01

Task 5.

Overview of Configuring and Installing Cisco Unified IP Phones

For More Information

See the

"Configuring Startup Network

Settings" section on page

See the

"Ethernet Setup Menu" section on

page

7-4.

See

Chapter 6, "Understanding the VoIP

Wireless Network."

3-21.

1-29