Cisco Small Business SPA525G2 Manual del usuario - Página 14

Navegue en línea o descargue pdf Manual del usuario para Teléfono IP Cisco Small Business SPA525G2. Cisco Small Business SPA525G2 47 páginas. Vpn status
También para Cisco Small Business SPA525G2: Ficha de datos (6 páginas), Manual de inicio rápido (2 páginas), Manual del usuario (8 páginas), Manual del usuario (22 páginas), Manual de inicio rápido (14 páginas), Manual de configuración (12 páginas), Manual de configuración (12 páginas), Manual de inicio rápido (21 páginas), Tarjeta de referencia rápida (2 páginas), Manual de inicio rápido (8 páginas), Manual de inicio rápido (3 páginas), Manual de inicio rápido (3 páginas), Manual de inicio rápido (3 páginas), Manual de inicio rápido (4 páginas), Manual (3 páginas), Manual (3 páginas), Configuración de (9 páginas), Manual de inicio rápido (2 páginas), Manual de inicio rápido (2 páginas)

Chapter 2 – Installing your Cisco SPA 525G IP phone

Your Cisco 525G2 phone will have been set up by a Vodafone One Net engineer, so it should already be

correctly installed and working. However, the information within this section of the guide will help you

move a phone to another location or swap it with another device.

Before you install your phone, check with your Vodafone One Net administrator (if you have one) that the

network's ready, read the safety information and make sure you have all the phone parts and user guides

available.

Note: The RJ-11 port marked 'AUX' is reserved for connection with the Cisco SPA 500S Attendant

Console that works with the Cisco 525G2. It can't be used as a telephone line port.

Important:

Don't plug a telephone line cord into the port marked 'AUX'

1. Insert the longest end of the coiled phone cord into the back of the phone base in the slot marked

with a phone symbol. This port is labelled #5 on the Cisco 525G2 IP phone connections image.

2. Insert the short end of the phone cord into the jack at the bottom of the handset (not shown).

Version 1.5

14 of 47