Cisco SPA302D Manual del usuario - Página 15

Navegue en línea o descargue pdf Manual del usuario para Teléfono IP Cisco SPA302D. Cisco SPA302D 49 páginas. Mobility enhanced cordless handset
También para Cisco SPA302D: Manual del usuario (38 páginas), Ficha de datos (7 páginas), Manual del usuario (10 páginas), Manual de inicio rápido (2 páginas)

Imprimir página

8. Insert the power clip into the power adapter.

9. Insert the power adapter into the power source or wall outlet.

10. Connect the power adapter to the charging cradle in the port

shown below.

Only use the 1Amp power adapter designed for use with

Cisco Cordless Handset SPA300 Series devices.DO NOT

USE THE POWER ADPATER FOR THE CISCO CORDLESS

BASE

WARNING

11. Place the handset into the charging cradle. The light on the

charging cradle appears solid green when the handset is

charging.

Charge the Handset for a minimum of 10 hours before using the

Handset for the first time to ensure that the Handset is fully

charged

Note

12. After handset is fully charged or while the handset is in the

cradle do the following.

13. On the Cisco Cordless Handset, press and hold the End Call.

button for 5 seconds.

14. Release the End

Call button and wait up to 10

seconds for the screen to illuminate.

Owner's Manual