Cisco SPA302D Manual del usuario - Página 16

Navegue en línea o descargue pdf Manual del usuario para Teléfono IP Cisco SPA302D. Cisco SPA302D 49 páginas. Mobility enhanced cordless handset
También para Cisco SPA302D: Manual del usuario (38 páginas), Ficha de datos (7 páginas), Manual del usuario (10 páginas), Manual de inicio rápido (2 páginas)

Imprimir página

15. If screen does not illuminate verify batteries are installed

correctly and repeat steps 11-12 before moving to next step.

Installing and Replacing Cordless Handset Batteries

Each Cordless Handset purchased from Intermedia will come

with batteries pre-installed. Batteries must be charged for 10

hours prior to first use. Use the following instructions to verify

batteries are correctly installed or when replacing.

Rechargeable batteries must be replaced periodically to retain a

charge.

Note

Defect or exhausted batteries should never be disposed of as

municipal waste. Return old batteries a licensed battery dealer or

a designated collection facility. Do not incinerate batteries.

WARNING

Use only size AAA Ni-MH 800 mAh (1.2V) rechargeable batteries

in the Cisco SPA302D Handset. Place the Handset in the

charging cradle for a recommended initial charge of 10 hours

before using the Handset for the first time.

WARNING

1. Slide Handset battery cover and remove.

2. Place AAA Ni-MH 800 mAh (1.2V) rechargeable batteries into

the Handset per the label inside the battery compartment.

3. Replace the Handset battery cover by sliding on.

Owner's Manual