Ricoh SP 200 Manual de instalación del software - Página 15

Navegue en línea o descargue pdf Manual de instalación del software para Impresora Ricoh SP 200. Ricoh SP 200 21 páginas. Software installation guide
También para Ricoh SP 200: Manual de instalación rápida (2 páginas), Manual de instalación rápida (2 páginas), Manual de instalación rápida (2 páginas)

Changing the IP Address Settings Using the Web Image Monitor

Starting Web Image Monitor

Launch the Web browser.

In the address bar, enter "http://(machine's IP address)/".

•

IPv4 Address

Enter the IP address shown on the network setting list.

Use a computer using the IP address shown on the network setting list with its variable

part modified.

•

IPv6 Address

Enter the IP address shown in "Link-local Address" in the network setting list. Enclose the

IP address in square brackets, thus: "http:/[fe80:226:73ff:fe47:62e]/".

Click [Log in].

Enter the administrator password, and then click [Log in].

If you are logging in for the first time, enter "admin133" as the password.

Configuring the Machine Settings to Obtain an IPv4 Address Automatically

Check that [DHCP] is set to [Enable] in [IPv4] in Web Image Monitor. If [DHCP] is set to [Enable],

the machine can automatically obtain the IP address.

CTT163