Ricoh SP 200 Software-Installationshandbuch - Seite 15

Blättern Sie online oder laden Sie pdf Software-Installationshandbuch für Drucker Ricoh SP 200 herunter. Ricoh SP 200 21 Seiten. Software installation guide
Auch für Ricoh SP 200: Handbuch zur Schnellinstallation (2 seiten), Handbuch zur Schnellinstallation (2 seiten), Handbuch zur Schnellinstallation (2 seiten)

Seite drucken
Ricoh SP 200 Software-Installationshandbuch
Changing the IP Address Settings Using the Web Image Monitor
Starting Web Image Monitor
1.
Launch the Web browser.
2.
In the address bar, enter "http://(machine's IP address)/".
•
IPv4 Address
Enter the IP address shown on the network setting list.
Use a computer using the IP address shown on the network setting list with its variable
part modified.
•
IPv6 Address
Enter the IP address shown in "Link-local Address" in the network setting list. Enclose the
IP address in square brackets, thus: "http:/[fe80:226:73ff:fe47:62e]/".
3.
Click [Log in].
4.
Enter the administrator password, and then click [Log in].
If you are logging in for the first time, enter "admin133" as the password.
Configuring the Machine Settings to Obtain an IPv4 Address Automatically
Check that [DHCP] is set to [Enable] in [IPv4] in Web Image Monitor. If [DHCP] is set to [Enable],
the machine can automatically obtain the IP address.
CTT163
15