Ricoh SP 200 Software-Installationshandbuch - Seite 13
Blättern Sie online oder laden Sie pdf Software-Installationshandbuch für Drucker Ricoh SP 200 herunter. Ricoh SP 200 21 Seiten. Software installation guide
Auch für Ricoh SP 200: Handbuch zur Schnellinstallation (2 seiten), Handbuch zur Schnellinstallation (2 seiten), Handbuch zur Schnellinstallation (2 seiten)
Seite drucken
3. Changing the IP Address Settings
Changing the IP Address Settings Using the Control Panel (SP
202SN/203SFN/204SFN/204SN only)
Configuring the Machine Settings to Obtain an IPv4 Address Automatically
1.
Press the [User Tools] key.
2.
Press the [ ] or [ ] key to select [Network Settings], and then press the [OK] key.
3.
Press the [ ] or [ ] key to select [Machine IPv4 Address], and then press the [OK]
key.
4.
Press the [ ] or [ ] key to select [DHCP Activated], and then press the [OK] key.
5.
Make sure [DHCP Activated] is set to [On].
After a setting has been changed, the machine automatically reboots itself.
Configuring the Machine's IPv4 Address Manually
1.
Press the [User Tools] key.
2.
Press the [ ] or [ ] key to select [Network Settings], and then press the [OK] key.
3.
Press the [ ] or [ ] key to select [Machine IPv4 Address], and then press the [OK]
key.
4.
Press the [ ] or [ ] key to select [DHCP Activated], and then press the [OK] key.
13