Ricoh SP 200 Panduan Instalasi Perangkat Lunak - Halaman 13
Jelajahi secara online atau unduh pdf Panduan Instalasi Perangkat Lunak untuk Printer Ricoh SP 200. Ricoh SP 200 21 halaman. Software installation guide
Juga untuk Ricoh SP 200: Panduan Instalasi Cepat (2 halaman), Panduan Instalasi Cepat (2 halaman), Panduan Instalasi Cepat (2 halaman)
Halaman Cetak
3. Changing the IP Address Settings
Changing the IP Address Settings Using the Control Panel (SP
202SN/203SFN/204SFN/204SN only)
Configuring the Machine Settings to Obtain an IPv4 Address Automatically
1.
Press the [User Tools] key.
2.
Press the [ ] or [ ] key to select [Network Settings], and then press the [OK] key.
3.
Press the [ ] or [ ] key to select [Machine IPv4 Address], and then press the [OK]
key.
4.
Press the [ ] or [ ] key to select [DHCP Activated], and then press the [OK] key.
5.
Make sure [DHCP Activated] is set to [On].
After a setting has been changed, the machine automatically reboots itself.
Configuring the Machine's IPv4 Address Manually
1.
Press the [User Tools] key.
2.
Press the [ ] or [ ] key to select [Network Settings], and then press the [OK] key.
3.
Press the [ ] or [ ] key to select [Machine IPv4 Address], and then press the [OK]
key.
4.
Press the [ ] or [ ] key to select [DHCP Activated], and then press the [OK] key.
13