Ricoh SP 200 Panduan Instalasi Perangkat Lunak - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Instalasi Perangkat Lunak untuk Printer Ricoh SP 200. Ricoh SP 200 21 halaman. Software installation guide
Juga untuk Ricoh SP 200: Panduan Instalasi Cepat (2 halaman), Panduan Instalasi Cepat (2 halaman), Panduan Instalasi Cepat (2 halaman)
Halaman Cetak
Quick Install for Network
•
For SP 202SN/203SFN/204SFN/204SN models, specify an IP address using the control panel
before installing the driver. For details about doing this, see "Changing the IP Address Settings
Using the Control Panel (SP 202SN/203SFN/204SFN/204SN only)".
•
In an IPv6 environment, specify an IP address using Web Image Monitor before installing the
driver. For details about configuring the IPv6 address, see "Configuring Network Settings" and
"Using Web Image Monitor" in the User Guide . For information about how to launch Web Im-
age Monitor, see "Starting Web Image Monitor".
Select [Network Quick Install (Fixed IP)] or [Network Quick Install (DHCP)]
The item to select depends on the type and method of IP address configuration selected in "Se-
lecting the Type and Method of IP Address Configuration". Install the software according to the
following instructions.
(1) Configuring the Machine Settings to Obtain an IPv4 Address Automatically
Install (DHCP)]
(2) Configuring the Machine's IPv4 Address Manually
(3) Configuring the Machine Settings to Obtain an IPv6 Address Automatically
Install (DHCP)] or [Network Quick Install (Fixed IP)]
(4) Configuring the Machine's IPv6 Address Manually
work Quick Install (Fixed IP)]
Selecting [Network Quick Install (DHCP)]
1.
Turn on the power of the computer.
Quit all applications currently running.
2.
Insert the CD-ROM into the CD-ROM drive.
3.
Select a language for the interface, and then click [OK].
[Network Quick Install (Fixed IP)]
[Network Quick Install (DHCP)] or [Net-
CFT052
9
[Network Quick
[Network Quick