Ricoh Aficio G700 Manual del usuario del software - Página 15

Navegue en línea o descargue pdf Manual del usuario del software para Cámara digital Ricoh Aficio G700. Ricoh Aficio G700 50 páginas. Ricoh digital cameras software user guide
También para Ricoh Aficio G700: Comparación de la competencia (14 páginas), Especificaciones (4 páginas), Folleto y especificaciones (6 páginas), Manual de instrucciones para la actualización del firmware (9 páginas)

Connecting the Camera to a Com‑

puter and Downloading Images

Make sure that the camera power is

off.

Connect the accessory USB cable to

a USB port of your computer.

Connect the USB cable to the USB

terminal of your camera.

Your camera turns on.

Your computer automatically reads the file

necessary for recognizing the camera as a

drive.

After this preparation, the camera is

displayed as a drive on the Desktop.

From the displayed drive, copy a

file to the desired location.

The figure below shows the folder

configuration in the drive.

When the contents of the internal memory

are displayed, the drive name is [RICOHDCI].

• Do not turn off the camera or disconnect the

USB cable during image transfer. The files will

not be written correctly.

• Do not use the computer to format the SD

memory card or the internal memory. Use the

camera to format the SD memory card or the

internal memory.

• Be sure to stop the connection before

removing the USB cable.

• Only one Ricoh digital camera can be

connected to one computer. Do not connect

multiple Ricoh cameras to one computer at the

same time.

• When downloading images from your camera,

load a battery with adequate remaining power

in the camera.

• If a file with the same name already exists at

the destination, it is overwritten. If you do not

want the file to be overwritten, rename the file

or transfer data to another folder.

• When an SD memory card is loaded, its files

are displayed. Otherwise, files in the internal

memory are displayed.