Ricoh Aficio CL3000 Manual de opciones - Página 33

Navegue en línea o descargue pdf Manual de opciones para Accesorios para impresoras Ricoh Aficio CL3000. Ricoh Aficio CL3000 48 páginas. Sap printing
También para Ricoh Aficio CL3000: Manual (49 páginas), Manual de instalación (3 páginas), Manual de instalación rápida (4 páginas), Manual complementario (3 páginas), Manual complementario (38 páginas), Manual (12 páginas)

Imprimir página

G G G G

Press { { { { U U U U } } } } or { { { { T T T T } } } } to select the

transmission mode.

Note

❒ The factory default is "802.11

Ad hoc".

❒ To use an IEEE 802.11b card for

w h i c h t h e S S I D ( N e t w o r k

Name) setting is not necessary,

select "Ad hoc".

H H H H

Press { { { { Enter #} } } } .

The display returns to the previous

menu in a few seconds.

I I I I

If "802.11 Ad hoc" or "Ad hoc" is

selected for "Comm. Mode", set

the channel to use for transmis-

sion.

Note

❒ Confirm the network adminis-

trator for the channel to use.

A Press { { { { U U U U } } } } or { { { { T T T T } } } } to display

"Channel".

IEEE 802.11b:

Channel

B Press { { { { Enter #} } } } .

The channel currently used ap-

pears on the panel display.

Channel:

(1-11)

C Press { { { { U U U U } } } } or { { { { T T T T } } } } to enter the

channel.

D Press { { { { Enter #} } } } .

J J J J

K K K K

802.11b Interface Unit Type A

Set "Trans. Speed" in the same

way.

Note

❒ The factory default is "Auto". If

you need to change the trans-

mitting speed depending on en-

vironment you are using, select

the appropriate transmitting

speed.

Press the { { { { U U U U } } } } or { { { { T T T T } } } } key to dis-

play "SSID", and then press the

{ { { { Enter #} } } } key.

IEEE 802.11b:

SSID

The following message appears on

the panel display.

SSID:

Enter ID

Note

❒ The factory default is "ASSID".

❒ If an SSID has been set, you can

check the set SSID. Press the

{ { { { U U U U } } } } or { { { { T T T T } } } } key to display

"View", and then press the { { { { En-

ter #} } } } key.

A Press the { { { { Enter #} } } } key.

The following message appears

on the panel display.

SSID:

Note

❒ The value in brackets at the

upper right is the number of

characters entered.

[ 0]