Epson EMP 810 Manual de instalación en red - Página 32
Navegue en línea o descargue pdf Manual de instalación en red para Proyector Epson EMP 810. Epson EMP 810 37 páginas. Esc/vp21 command user's guide for business projectors
También para Epson EMP 810: Manual de consulta rápida (17 páginas), Manual del usuario (24 páginas), Especificaciones (1 páginas), Manual del usuario (28 páginas)
Cannot access a memory card over the network
■
Remove the memory card from the printer. Select
control panel, then select
Network
■
For Macintosh, follow the instructions on page 28 to install an application
that allows you to access the printer's memory card slots over the network.
Printing Problems
Cannot print over the network
■
For wireless connections, print a Network Status Sheet (see page 33). If the
Link Status is Disconnected, make sure the wireless router or access point is
turned on and the settings are correct for your wireless network.
■
For wired connections, print a Network Status Sheet (see page 33) and make
sure the settings are correct for your network.
If the Network Status is Disconnected, try the following:
■
Make sure the Ethernet cable is securely connected to both the printer
and your router, access point, switch, or hub.
■
Try connecting to another port on your router, access point, switch, or
hub.
■
Try connecting the printer to another router, access point, switch or hub.
■
Try connecting the printer to your router, access point, switch, or hub
with another Ethernet cable.
■
When using TCP/IP, make sure the printer's IP address is set correctly for your
network. If your network does not assign IP addresses using DHCP, you need
to set the IP address manually.
Printing is slow or the print is cut off
For wireless connections, print a Network Status Sheet (see below) and check the
Signal Strength. Or check the number of bars next to the
printer's control panel. If the Signal Strength is poor or you see only one or two
bars, try moving the printer closer to your wireless router or access point. Avoid
placing the printer next to a microwave oven, 2.4 GHz cordless phone, or large
metal objects such as a filing cabinet.
32
Troubleshooting
Network Settings
>
Press
Read/Write.
>
File Sharing Setup
, then press
OK
OK
on the printer's
Setup
again to update the setting.
WiFi icon on the
>