- ページ 32

プロジェクター Epson EMP 810のPDF ネットワーク・インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Epson EMP 810 37 ページ。 Esc/vp21 command user's guide for business projectors
Epson EMP 810 にも：クイック・リファレンス・マニュアル (17 ページ), ユーザーマニュアル (24 ページ), 仕様 (1 ページ), ユーザーマニュアル (28 ページ)

ページを印刷する

Cannot access a memory card over the network

■

Remove the memory card from the printer. Select

control panel, then select

Network

■

For Macintosh, follow the instructions on page 28 to install an application

that allows you to access the printer's memory card slots over the network.

Printing Problems

Cannot print over the network

■

For wireless connections, print a Network Status Sheet (see page 33). If the

Link Status is Disconnected, make sure the wireless router or access point is

turned on and the settings are correct for your wireless network.

■

For wired connections, print a Network Status Sheet (see page 33) and make

sure the settings are correct for your network.

If the Network Status is Disconnected, try the following:

■

Make sure the Ethernet cable is securely connected to both the printer

and your router, access point, switch, or hub.

■

Try connecting to another port on your router, access point, switch, or

hub.

■

Try connecting the printer to another router, access point, switch or hub.

■

Try connecting the printer to your router, access point, switch, or hub

with another Ethernet cable.

■

When using TCP/IP, make sure the printer's IP address is set correctly for your

network. If your network does not assign IP addresses using DHCP, you need

to set the IP address manually.

Printing is slow or the print is cut off

For wireless connections, print a Network Status Sheet (see below) and check the

Signal Strength. Or check the number of bars next to the

printer's control panel. If the Signal Strength is poor or you see only one or two

bars, try moving the printer closer to your wireless router or access point. Avoid

placing the printer next to a microwave oven, 2.4 GHz cordless phone, or large

metal objects such as a filing cabinet.

Troubleshooting

Network Settings

Press

Read/Write.

File Sharing Setup

, then press

on the printer's

Setup

again to update the setting.

WiFi icon on the