Cisco 2500 Series Manual de instalación - Página 6

Navegue en línea o descargue pdf Manual de instalación para Enrutador de red Cisco 2500 Series. Cisco 2500 Series 12 páginas. Wireless controller
También para Cisco 2500 Series: Manual de configuración (19 páginas), Manual de implantación (23 páginas), Manual de configuración (50 páginas), Manual de introducción (47 páginas)

Replacing the Cover

Figure 6

Screw

Step 3

Figure 7

Replacing the Cover

Take the following steps to replace the cover:

Step 1

Step 2

6 Installing Cisco AC and DC Power Supplies in Cisco 2500 Series Routers

Installing the Screw

Connect the power connector from the system board. Grasp the sides of the power

connector and gently push downward while rocking the connector side to side.

(See Figure 7.)

Connecting the Power Connector

Fan

Power connector

Fan connector

Position the two chassis sections, as shown in Figure 8.

Referring to Figure 8, press the two chassis sections together and ensure the following:

•

The top section ﬁts into the rear of the bottom section. (See A in Figure 8.)

•

The bottom section ﬁts into the front of the top section. (See B in Figure 8.)

•

Each side of the top and bottom sections ﬁts together. (See C in Figure 8.)

AC power supply