Cisco 2524 - Router - EN Preparación de la instalación - Página 3

Navegue en línea o descargue pdf Preparación de la instalación para Enrutador de red Cisco 2524 - Router - EN. Cisco 2524 - Router - EN 19 páginas. Troubleshooting guide
También para Cisco 2524 - Router - EN: Manual de configuración (23 páginas), Manual de configuración (23 páginas), Visión general (10 páginas), Manual de solución de problemas (4 páginas)

Warning

source. (To see translated versions of this warning, refer to the appendix "Translated Safety

Warnings.")

•

Look carefully for possible hazards in your work area, such as moist floors, ungrounded

power extension cables, frayed power cords, and missing safety grounds.

•

If an electrical accident occurs, proceed as follows:

— Use caution; do not become a victim yourself.

— Turn off power to the system.

— If possible, send another person to get medical aid. Otherwise, assess the condition

— Determine if the person needs rescue breathing or external cardiac compressions;

Preventing Electrostatic Discharge Damage

Electrostatic discharge (ESD) can damage equipment and impair electrical circuitry. ESD

damage occurs when electronic components are improperly handled and can result in

complete or intermittent failures.

Always follow ESD-prevention procedures when removing and replacing components.

Ensure that the chassis is electrically connected to earth ground. Wear an ESD-preventive

wrist strap, ensuring that it makes good skin contact. Connect the grounding clip to an

unpainted surface of the chassis frame to safely ground unwanted ESD voltages. To

properly guard against ESD damage and shocks, the wrist strap and cord must operate

effectively. If no wrist strap is available, ground yourself by touching the metal part of the

chassis.

Caution

should be between 1 and 10 megohms (Mohms).

Read the installation instructions before you connect the system to its power

of the victim and then call for help.

then take appropriate action.

For safety, periodically check the resistance value of the antistatic strap, which

Preparing to Install the Cisco 2524 and Cisco 2525 Routers 2-3

Safety Recommendations