Cisco 2524 - Router - EN Voorbereiden op installatie - Pagina 3

Blader online of download pdf Voorbereiden op installatie voor {categorie_naam} Cisco 2524 - Router - EN. Cisco 2524 - Router - EN 19 pagina's. Troubleshooting guide
Ook voor Cisco 2524 - Router - EN: Configuratiehandleiding (23 pagina's), Configuratiehandleiding (23 pagina's), Overzicht (10 pagina's), Handleiding voor probleemoplossing (4 pagina's)

Cisco 2524 - Router - EN Voorbereiden op installatie
Warning
source. (To see translated versions of this warning, refer to the appendix "Translated Safety
Warnings.")
Look carefully for possible hazards in your work area, such as moist floors, ungrounded
power extension cables, frayed power cords, and missing safety grounds.
If an electrical accident occurs, proceed as follows:
— Use caution; do not become a victim yourself.
— Turn off power to the system.
— If possible, send another person to get medical aid. Otherwise, assess the condition
— Determine if the person needs rescue breathing or external cardiac compressions;

Preventing Electrostatic Discharge Damage

Electrostatic discharge (ESD) can damage equipment and impair electrical circuitry. ESD
damage occurs when electronic components are improperly handled and can result in
complete or intermittent failures.
Always follow ESD-prevention procedures when removing and replacing components.
Ensure that the chassis is electrically connected to earth ground. Wear an ESD-preventive
wrist strap, ensuring that it makes good skin contact. Connect the grounding clip to an
unpainted surface of the chassis frame to safely ground unwanted ESD voltages. To
properly guard against ESD damage and shocks, the wrist strap and cord must operate
effectively. If no wrist strap is available, ground yourself by touching the metal part of the
chassis.
Caution
should be between 1 and 10 megohms (Mohms).
Read the installation instructions before you connect the system to its power
of the victim and then call for help.
then take appropriate action.
For safety, periodically check the resistance value of the antistatic strap, which
Preparing to Install the Cisco 2524 and Cisco 2525 Routers 2-3
Safety Recommendations