Cisco Nexus 7000 Series Manual de instalación - Página 7

Navegue en línea o descargue pdf Manual de instalación para Enrutador de red Cisco Nexus 7000 Series. Cisco Nexus 7000 Series 18 páginas. Switch chassis
También para Cisco Nexus 7000 Series: Manual de referencia (2 páginas), Manual de instrucciones de instalación (39 páginas), Referencia (34 páginas), Configuración de (8 páginas), Manual de configuración (28 páginas), Manual de inicio rápido (10 páginas), Manual de inicio rápido (29 páginas), Manual de instrucciones de sustitución (14 páginas), Manual de instrucciones de sustitución (21 páginas), Manual de instalación (16 páginas), Manual de solución de problemas (10 páginas)

Installation

Step 5

Connect your PC to the data network, and browse to the new Hypervisor IP address. Verify the web page as

shown in Figure 7.

Figure 7: Hypervisor Welcome Page

Step 6

If not already installed on your PC, download and install the vSphere client from the link on the hypervisor

welcome page.

You need internet access to download the vSphere client from this link. If Internet access is not available, you

can download the client installation file from [datastore1] /OVA-ISO/vmware. A link to browse the datastore

is provided on the right of the screen shown in figure 7.

Access and Configure Hypervisor

Some Business Edition applications require the host to have a valid time reference. Follow these steps to

access the ESXi host, configure NTP, configure fault tolerance for network interface cards (NICs) using the

NIC teaming feature, view predeployed applications, and browse the datastore to verify the preloaded

collaboration application software.

Access and Configure Hypervisor

Cisco Business Edition 7000 Installation Guide, Release 11.6