Cisco Nexus 7000 Series Installatiehandleiding - Pagina 7

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Cisco Nexus 7000 Series. Cisco Nexus 7000 Series 18 pagina's. Switch chassis
Ook voor Cisco Nexus 7000 Series: Referentiehandleiding (2 pagina's), Handleiding voor installatie-instructies (39 pagina's), Referentie (34 pagina's), configureren (8 pagina's), Configuratiehandleiding (28 pagina's), Snelstarthandleiding (10 pagina's), Snelstarthandleiding (29 pagina's), Handleiding vervangende instructies (14 pagina's), Handleiding vervangende instructies (21 pagina's), Handleiding installeren (16 pagina's), Handleiding voor probleemoplossing (10 pagina's)

Installation

Step 5

Connect your PC to the data network, and browse to the new Hypervisor IP address. Verify the web page as

shown in Figure 7.

Figure 7: Hypervisor Welcome Page

Step 6

If not already installed on your PC, download and install the vSphere client from the link on the hypervisor

welcome page.

You need internet access to download the vSphere client from this link. If Internet access is not available, you

can download the client installation file from [datastore1] /OVA-ISO/vmware. A link to browse the datastore

is provided on the right of the screen shown in figure 7.

Access and Configure Hypervisor

Some Business Edition applications require the host to have a valid time reference. Follow these steps to

access the ESXi host, configure NTP, configure fault tolerance for network interface cards (NICs) using the

NIC teaming feature, view predeployed applications, and browse the datastore to verify the preloaded

collaboration application software.

Access and Configure Hypervisor

Cisco Business Edition 7000 Installation Guide, Release 11.6