Cisco Nexus 9000 Series Manual de configuración - Página 15

Navegue en línea o descargue pdf Manual de configuración para Enrutador de red Cisco Nexus 9000 Series. Cisco Nexus 9000 Series 32 páginas. Switch chassis
También para Cisco Nexus 9000 Series: Manual de configuración de inicio rápido (6 páginas), Manual de configuración (32 páginas), Manual (30 páginas), Manual de instalación (12 páginas), Instalación de (8 páginas), Manual de inicio rápido (14 páginas), Manual (16 páginas)

Configuring the Catena Solution

Routed Mode

The following figure shows the traffic flow between appliances in the routed mode when catena is enabled,

enabled with bad traffic, and disabled.

Figure 2: Routed Mode

You can configure catena service in the default VRF or in non-default VRFs.

For the catena service to successfully redirect traffic, all the ingress interfaces and device-group nodes must

belong to the same VRF. You must ensure that all ingress interfaces and node members within the associated

device group are reachable in the configured VRF.

You can configure Cisco Nexus devices such that packets can be redirected through multiple devices using

Catena.

To configure catena:

1 Enable catena.

2 Create a port group.

Cisco Nexus 9000 Series NX-OS Catena Configuration Guide, Release 7.x

Routed Mode