Cisco Nexus 9000 Series 구성 매뉴얼 - 페이지 15

{카테고리_이름} Cisco Nexus 9000 Series에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Nexus 9000 Series 32 페이지. Switch chassis
Cisco Nexus 9000 Series에 대해서도 마찬가지입니다: 빠른 시작 구성 매뉴얼 (6 페이지), 구성 매뉴얼 (32 페이지), 매뉴얼 (30 페이지), 설치 매뉴얼 (12 페이지), 설치 (8 페이지), 빠른 시작 매뉴얼 (14 페이지), 매뉴얼 (16 페이지)

페이지 인쇄

1. Configuring an Ip Acl

Configuring the Catena Solution

Routed Mode

The following figure shows the traffic flow between appliances in the routed mode when catena is enabled,

enabled with bad traffic, and disabled.

Figure 2: Routed Mode

VRF Support

You can configure catena service in the default VRF or in non-default VRFs.

For the catena service to successfully redirect traffic, all the ingress interfaces and device-group nodes must

belong to the same VRF. You must ensure that all ingress interfaces and node members within the associated

device group are reachable in the configured VRF.

Catena Configuration Process

You can configure Cisco Nexus devices such that packets can be redirected through multiple devices using

Catena.

To configure catena:

1 Enable catena.

2 Create a port group.

Cisco Nexus 9000 Series NX-OS Catena Configuration Guide, Release 7.x

Routed Mode