Cisco uBR924 Instalación y puesta en marcha - Página 29

Navegue en línea o descargue pdf Instalación y puesta en marcha para Enrutador de red Cisco uBR924. Cisco uBR924 34 páginas. Cable access router

Imprimir página
Reconfigure the Router (continued)
!
router rip
version 2
network 10.0.0.0
network 24.0.0.0
!
ip classless
no ip http server
!
access-list 100 permit ip host 10.1.0.25 30.1.1.0 0.0.0.255
!
line con 0
exec-timeout 0 0
transport input none
line vty 0 4
login
!
end
L2TP Example
Note: Encryption/decryption is subject to export licensing controls. To support this feature set, the router must
be configured in routing mode, rather than bridging. Cisco IOS Release 12.0(5)T or higher must be used. Both
the CMTS and the Cisco uBR924 must be enabled and properly configured to support the mode.
Current configuration:
!
! Last configuration change at 20:24:59 - Thu Apr 1 1999
! NVRAM config last updated at 20:34:52 - Thu Apr 1 1999
!
version 12.0
no service pad
service timestamps debug uptime
service timestamps log uptime
!
hostname Router
!
class-map class-default
match any
!
!
!
clock timezone - 0 1
ip subnet-zero
ip tftp source-interface cable-modem0
no ip domain-lookup
!
27