Cisco uBR924 Встановлення та запуск - Сторінка 29

Переглянути онлайн або завантажити pdf Встановлення та запуск для Мережевий маршрутизатор Cisco uBR924. Cisco uBR924 34 сторінки. Cable access router

Друкувати сторінку
Reconfigure the Router (continued)
!
router rip
version 2
network 10.0.0.0
network 24.0.0.0
!
ip classless
no ip http server
!
access-list 100 permit ip host 10.1.0.25 30.1.1.0 0.0.0.255
!
line con 0
exec-timeout 0 0
transport input none
line vty 0 4
login
!
end
L2TP Example
Note: Encryption/decryption is subject to export licensing controls. To support this feature set, the router must
be configured in routing mode, rather than bridging. Cisco IOS Release 12.0(5)T or higher must be used. Both
the CMTS and the Cisco uBR924 must be enabled and properly configured to support the mode.
Current configuration:
!
! Last configuration change at 20:24:59 - Thu Apr 1 1999
! NVRAM config last updated at 20:34:52 - Thu Apr 1 1999
!
version 12.0
no service pad
service timestamps debug uptime
service timestamps log uptime
!
hostname Router
!
class-map class-default
match any
!
!
!
clock timezone - 0 1
ip subnet-zero
ip tftp source-interface cable-modem0
no ip domain-lookup
!
27