Cisco 1700 series Manual

Navegue en línea o descargue pdf Manual para Punto de acceso inalámbrico Cisco 1700 series. Cisco 1700 series 15 páginas. Secure firewall management center
También para Cisco 1700 series: Manual de cumplimiento de la normativa e información de seguridad (45 páginas), Manual de configuración (25 páginas), Nota de aplicación (41 páginas), Solución de problemas de hardware (12 páginas), Manual general (13 páginas), Configuración de (34 páginas), Manual (5 páginas), Manual de inicio rápido (6 páginas), Manual de instalación del hardware (46 páginas)

Cisco 1700 series Manual
ROM Monitor
This appendix describes the Cisco router ROM monitor (also called the bootstrap
program). The ROM monitor firmware runs when the router is powered up or
reset. The firmware helps to initialize the processor hardware and boot the
operating system software. You can perform certain configuration tasks, such as
recovering a lost password or downloading software over the console port, by
using the ROM monitor. If there is no Cisco IOS software image loaded on the
router, the ROM monitor runs the router.
This appendix contains the following sections:

Entering the ROM Monitor

To use the ROM monitor, you must be using a terminal or PC that is connected to
the router by means of the console port. Refer to the installation chapter in the
Hardware Installation Guide for your router, for information about connecting the
router to a PC or terminal.
78-5407-03
Entering the ROM Monitor
ROM Monitor Commands
Command Descriptions
Disaster Recovery with TFTP Download
Configuration Register
Console Download
A P P E N D I X
Cisco 1700 Series Router Software Configuration Guide
B
B-1