Cisco 800 Series Notas de publicación - Página 18

Navegue en línea o descargue pdf Notas de publicación para Punto de acceso inalámbrico Cisco 800 Series. Cisco 800 Series 36 páginas. Fast step software design guide
También para Cisco 800 Series: Manual de inicio rápido (13 páginas), Manual de inicio rápido (17 páginas), Configuración de (32 páginas), Manual de diseño (50 páginas)

Imprimir página
Cisco 800 Series Notas de publicación

Important Notes

•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Important Notes
The following sections contain important notes about Cisco IOS Release 12.1(5)YC3 that can apply to
the Cisco 800 Series Routers. (Also, see the
OpenDSL Issues for the Cisco 827 and 827-4V Routers
The Cisco 827 and 827-4V routers with OpenDSL are preloaded with a CLI configuration such as
"autoconfigure" instead of with no configuration. If a router is not loaded with some configuration, it
will enter the initial console-user configuration dialog, which requires input from the user to get the
router started.
If the image has been deleted by the user, the user needs to clear flash memory to allow the downloading
of a new image during auto provisioning.
There is no WarmRestart action available for the routers. Selecting WarmRestart on CDCM will not
reload the routers.
Release Notes for the Cisco 800 Series Routers for Cisco IOS Release 12.1(5)YC
18
NOVELL-IPX-MIB
NOVELL-RIPSAP-MIB
OLD-CISCO-CHASSIS-MIB
OLD-CISCO-CPU-MIB
OLD-CISCO-INTERFACE-MIB
OLD-CISCO-IP-MIB
OLD-CISCO-MEMORY-MIB
OLD-CISCO-NOVELL-MIB
OLD-CISCO-SYSTEM-MIB
OLD-CISCO-TCP-MIB
PIM-MIB
RFC1398-MIB (ETHERMIB)
RFC1213-MIB
RSVP-MIB
SNMPv2-MIB
TCP-MIB
UDP-MIB
XGCP-MIB
"Caveats" section on page
23.)
78-12776-04