Cisco 800 Series Informacje o wersji - Strona 18

Przeglądaj online lub pobierz pdf Informacje o wersji dla Bezprzewodowy punkt dostępowy Cisco 800 Series. Cisco 800 Series 36 stron. Fast step software design guide
Również dla Cisco 800 Series: Skrócona instrukcja obsługi (13 strony), Skrócona instrukcja obsługi (17 strony), Konfigurowanie (32 strony), Podręcznik projektowania (50 strony)

Important Notes

•

Important Notes

The following sections contain important notes about Cisco IOS Release 12.1(5)YC3 that can apply to

the Cisco 800 Series Routers. (Also, see the

OpenDSL Issues for the Cisco 827 and 827-4V Routers

The Cisco 827 and 827-4V routers with OpenDSL are preloaded with a CLI configuration such as

"autoconfigure" instead of with no configuration. If a router is not loaded with some configuration, it

will enter the initial console-user configuration dialog, which requires input from the user to get the

router started.

If the image has been deleted by the user, the user needs to clear flash memory to allow the downloading

of a new image during auto provisioning.

There is no WarmRestart action available for the routers. Selecting WarmRestart on CDCM will not

reload the routers.

Release Notes for the Cisco 800 Series Routers for Cisco IOS Release 12.1(5)YC

NOVELL-IPX-MIB

NOVELL-RIPSAP-MIB

OLD-CISCO-CHASSIS-MIB

OLD-CISCO-CPU-MIB

OLD-CISCO-INTERFACE-MIB

OLD-CISCO-IP-MIB

OLD-CISCO-MEMORY-MIB

OLD-CISCO-NOVELL-MIB

OLD-CISCO-SYSTEM-MIB

OLD-CISCO-TCP-MIB

PIM-MIB

RFC1398-MIB (ETHERMIB)

RFC1213-MIB

RSVP-MIB

SNMPv2-MIB

TCP-MIB

UDP-MIB

XGCP-MIB

"Caveats" section on page

23.)

78-12776-04