Cisco 800 Series Manual de diseño - Página 42

Navegue en línea o descargue pdf Manual de diseño para Punto de acceso inalámbrico Cisco 800 Series. Cisco 800 Series 50 páginas. Fast step software design guide
También para Cisco 800 Series: Notas de publicación (36 páginas), Manual de inicio rápido (13 páginas), Manual de inicio rápido (17 páginas), Configuración de (32 páginas)

Imprimir página
Cisco 800 Series Manual de diseño
DHCPLeaseMinsOnE0
DHCPNetworkAddressOnE0
DHCPNetworkSubnetMaskOnE0
DHCPPoolNameOnE0
EnablePassword
HideAddressRange
HideCentralRouternameISP
HideCentralRouternameRCN
HideNetworkAddress
HidePAT
HideProtocolNotSure
PasswordISP
Cisco 800 Fast Step Software Design Guide
A-2
Chapter A
Number of minutes for the DHCP lease. This flag is used
only when the router is configured as a DHCP server.
(Used with the DHCPLeaseHoursOnE0 and
DHCPLeaseDaysOnE0 flags.)
Network address of the device from which a router with
a DHCP server enabled can lease an Internet Protocol
(IP) address.
The subnet mask for the DHCPNetworkAddressOnE0
flag.
Name of the DHCP pool created on the router. This flag
is used only when router is set as a DHCP server.
Enable password for the router.
Hides the "Address range given by your Internet service
provider" control on the IP Address Range Given By
Your ISP window. If the value is 0 or blank, it is disabled
(displays the control). If the value is 1, it is enabled
(hides the control).
Hides the "Central Routername for connection to an
Internet Service Provider" control on the PPP Settings
window. If the value is 0 or blank, it is disabled (displays
the control). If the value is 1, it is enabled (hides the
control).
Hide the "Central Routername for connection to Remote
Corporate Network" control on the PPP Settings window.
If the value is 0 or blank, it is disabled (displays the
control). If the value is 1, it is enabled (hides the control).
Hides the "Network Address given by your ISP" control
on the IP Address Range Given By Your ISP window. If
the value is 0 or blank, it is disabled (displays the
control). If the value is 1, it is enabled (hides the control).
Hides the "No Address range given by your ISP" control
on the IP Address Range Given By Your ISP window. If
the value is 0 or blank, it is disabled (displays the
control). If the value is 1, it is enabled (hides the control).
Hides the "Not sure" option in the Serial Connection
Type window. If the value is 0 or blank, it is disabled
(displays the control). If the value is 1, it is enabled
(hides the control).
Password for a PPP connection to an Internet service
provider (ISP).
Additional Flags and Parameters
OL-10373-02