- ページ 42

無線アクセスポイント Cisco 800 SeriesのPDF 設計マニュアルをオンラインで閲覧またはダウンロードできます。Cisco 800 Series 50 ページ。 Fast step software design guide
Cisco 800 Series にも：リリースノート (36 ページ), クイック・スタート・マニュアル (13 ページ), クイック・スタート・マニュアル (17 ページ), 設定 (32 ページ)

ページを印刷する

DHCPLeaseMinsOnE0

DHCPNetworkAddressOnE0

DHCPNetworkSubnetMaskOnE0

DHCPPoolNameOnE0

EnablePassword

HideAddressRange

HideCentralRouternameISP

HideCentralRouternameRCN

HideNetworkAddress

HidePAT

HideProtocolNotSure

PasswordISP

Cisco 800 Fast Step Software Design Guide

A-2

Chapter A

Number of minutes for the DHCP lease. This flag is used

only when the router is configured as a DHCP server.

(Used with the DHCPLeaseHoursOnE0 and

DHCPLeaseDaysOnE0 flags.)

Network address of the device from which a router with

a DHCP server enabled can lease an Internet Protocol

(IP) address.

The subnet mask for the DHCPNetworkAddressOnE0

flag.

Name of the DHCP pool created on the router. This flag

is used only when router is set as a DHCP server.

Enable password for the router.

Hides the "Address range given by your Internet service

provider" control on the IP Address Range Given By

Your ISP window. If the value is 0 or blank, it is disabled

(displays the control). If the value is 1, it is enabled

(hides the control).

Hides the "Central Routername for connection to an

Internet Service Provider" control on the PPP Settings

window. If the value is 0 or blank, it is disabled (displays

the control). If the value is 1, it is enabled (hides the

control).

Hide the "Central Routername for connection to Remote

Corporate Network" control on the PPP Settings window.

If the value is 0 or blank, it is disabled (displays the

control). If the value is 1, it is enabled (hides the control).

Hides the "Network Address given by your ISP" control

on the IP Address Range Given By Your ISP window. If

the value is 0 or blank, it is disabled (displays the

control). If the value is 1, it is enabled (hides the control).

Hides the "No Address range given by your ISP" control

on the IP Address Range Given By Your ISP window. If

the value is 0 or blank, it is disabled (displays the

control). If the value is 1, it is enabled (hides the control).

Hides the "Not sure" option in the Serial Connection

Type window. If the value is 0 or blank, it is disabled

(displays the control). If the value is 1, it is enabled

(hides the control).

Password for a PPP connection to an Internet service

provider (ISP).

Additional Flags and Parameters

OL-10373-02