- ページ 43

無線アクセスポイント Cisco 800 SeriesのPDF 設計マニュアルをオンラインで閲覧またはダウンロードできます。Cisco 800 Series 50 ページ。 Fast step software design guide
Cisco 800 Series にも：リリースノート (36 ページ), クイック・スタート・マニュアル (13 ページ), クイック・スタート・マニュアル (17 ページ), 設定 (32 ページ)

ページを印刷する

Chapter A

Additional Flags and Parameters

PasswordRCN

PrimaryDNSAddressOnE0

PrimaryWINSAddressOnE0

ReadonlyPassword

RemotePhoneNumberISP1,

RemotePhoneNumberISP2,

RemotePhoneNumberRCN1,

RemotePhoneNumberRCN2

RouterName

SecondaryDNSAddressOnE0

SecondaryWINSAddressOnE0

ServiceProviderURL

SetAdjustPCStackSettings

SetRouterAsDHCPServerOnE0

SetRouterToDefaultConfig

OL-10373-02

Password for a PPP connection to a remote corporate

network.

Primary Domain Name System (DNS) address used to

configure the clients with the required DNS address

when the router is being used as a DHCP server. (See also

SecondaryDNSAddressOnE0.)

Primary WINS address used to configure the clients with

the required WINS address when the router is being used

as a DHCP server. (See also

SecondaryWINSAddressOnE0.)

Read-only password for the router.

Technical support phone numbers displayed in the

Technical Support window.

Name given to the router.

Secondary DNS address used to configure the clients

with the required DNS address when the router is being

used as a DHCP server. (See also

PrimaryDNSAddressOnE0.)

Secondary WINS address used to configure the clients

with the required WINS address when the router is being

used as a DHCP server. (See also

PrimaryWINSAddressOnE0.)

Technical support Web site for the Technical Support

pop-up window.

Router connection type. If the value is blank or 0, the

console cable connection is used, and the PC stack

settings are not changed. If the value is 1, the network is

used to configure the router.

Configures the router as a DHCP server on the LAN. If

the value is 0 or blank, the PC is also configured as a

DHCP client, so it can communicate with the router. If

this flag is set to 1 and the

SetForceStaticAddressOnPCAlways flag is set to 1, this

flag is given preference.

Sets the router to the factory default configuration. When

this flag is enabled, the Erase Configuration window is

skipped. Enabled = 1. Disabled (default) = 0.

Cisco 800 Fast Step Software Design Guide

A-3