Cisco Aironet 1520 Series Manual de instalación del hardware - Página 7
Navegue en línea o descargue pdf Manual de instalación del hardware para Punto de acceso inalámbrico Cisco Aironet 1520 Series. Cisco Aironet 1520 Series 50 páginas. Outdoor mesh access point
También para Cisco Aironet 1520 Series: Manual de introducción (37 páginas), Manual (27 páginas)
Imprimir página
R E V I E W D R A F T — C I S C O C O N F I D E N T I A L
Preface
This section describes the objectives, audience, organization, and conventions of the Cisco Aironet 1520
Series Outdoor Mesh Access Point Hardware Installation Guide.
Objectives
This publication explains the steps for installing the Cisco Aironet 1520 Series Outdoor Mesh Access
Point (hereafter called the access point). The access point is available in two models: The LAP1522 and
LAP1524. The LAP1522 model supports dual band (2.4- and 5-GHz) operation. The LAP1524 supports
dual band (2.4- and 5-GHz) operation and the 4.9-GHz public safety band.
Audience
This publication is for the person installing and configuring an access point for the first time. The
installer should be familiar with network structures, terms, and concepts.
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Warning
Statement 1030
Organization
This guide contains the following sections:
Chapter 1, "Overview,"
Chapter 2, "Mounting Instructions,"
needed during the installation of your access point.
Chapter 3, "Troubleshooting,"
Chapter 4, "Installing or Replacing the Backup Battery,"
the backup battery in the access point.
Appendix A, "Translated Safety Warnings,"
translations of the safety warnings that appear in this publication.
OL-12632-03
describes the major components and features of the access point.
provides warnings, safety information, and mounting information
provides basic troubleshooting procedures for the access point.
indicates how to access the document that provides
Cisco Aironet 1520 Series Outdoor Mesh Access Point Hardware Installation Guide
describes the precedures to install or replace
VII