ACU-RITE 02005TBDI Manual de instrucciones - Página 10

Navegue en línea o descargue pdf Manual de instrucciones para Estación meteorológica ACU-RITE 02005TBDI. ACU-RITE 02005TBDI 16 páginas.

Troubleshooting

No outdoor sensor

reception

no bars

Display screen

not working

Outdoor

temperature

is flashing or

showing dashes

Inaccurate

temperature

or humidity

If the wireless signal indicator shows no bars:

• Relocate the display unit and/or the outdoor sensor.

The units must be within 330 ft (100 m) of each other.

• Make sure both units are placed at least 3 feet (.9 m)

away from electronics that may interfere with the

wireless communication (such as TVs, microwaves,

computers, etc).

• Use standard alkaline batteries (or lithium batteries in

sensor when temperature is below -4ºF/-20ºC). Do not

use heavy duty or rechargeable batteries. NOTE: It

may take up to 20 minutes for display unit and sensor

to synchronize after batteries are replaced.

• Check that the batteries are installed correctly.

Batteries may need to be replaced.

• Reset display by pressing the RESET button, located in

the battery compartment on the display unit. Time and

date will need to be entered after a reset.

• Forecast will be blank for first 4 hours after battery

installation.

Flashing of the outdoor temperature is generally an

indication of wireless interference.

1. Bring both the sensor and display unit indoors and

remove batteries/power adapter from both.

2. Make sure the A-B-C switch on both units match.

3. Reinstall batteries in the outdoor sensor.

4. Reinstall batteries in the display unit.

5. Let the units sit within a couple feet of each other

for about 20 minutes to gain a strong connection.

• Make sure both the display unit and sensor are

placed out of direct sunlight and away from any heat

sources or vents (see page 8).

• Make sure both units are positioned away from any

sources of moisture.