ACU-RITE 02005TBDI Instruction Manual - Page 10
Browse online or download pdf Instruction Manual for Weather Station ACU-RITE 02005TBDI. ACU-RITE 02005TBDI 16 pages.
Print Page
Troubleshooting
No outdoor sensor
reception
no bars
Display screen
not working
Outdoor
temperature
is flashing or
showing dashes
Inaccurate
temperature
or humidity
If the wireless signal indicator shows no bars:
• Relocate the display unit and/or the outdoor sensor.
The units must be within 330 ft (100 m) of each other.
• Make sure both units are placed at least 3 feet (.9 m)
away from electronics that may interfere with the
wireless communication (such as TVs, microwaves,
computers, etc).
• Use standard alkaline batteries (or lithium batteries in
sensor when temperature is below -4ºF/-20ºC). Do not
use heavy duty or rechargeable batteries. NOTE: It
may take up to 20 minutes for display unit and sensor
to synchronize after batteries are replaced.
• Check that the batteries are installed correctly.
Batteries may need to be replaced.
• Reset display by pressing the RESET button, located in
the battery compartment on the display unit. Time and
date will need to be entered after a reset.
• Forecast will be blank for first 4 hours after battery
installation.
Flashing of the outdoor temperature is generally an
indication of wireless interference.
1. Bring both the sensor and display unit indoors and
remove batteries/power adapter from both.
2. Make sure the A-B-C switch on both units match.
3. Reinstall batteries in the outdoor sensor.
4. Reinstall batteries in the display unit.
5. Let the units sit within a couple feet of each other
for about 20 minutes to gain a strong connection.
• Make sure both the display unit and sensor are
placed out of direct sunlight and away from any heat
sources or vents (see page 8).
• Make sure both units are positioned away from any
sources of moisture.
10