Cisco Cisco Aironet Wireless LAN Client Manual de introducción - Página 14
Navegue en línea o descargue pdf Manual de introducción para Punto de acceso inalámbrico Cisco Cisco Aironet Wireless LAN Client. Cisco Cisco Aironet Wireless LAN Client 38 páginas.
También para Cisco Cisco Aironet Wireless LAN Client: Manual de inicio rápido (12 páginas)
Imprimir página
9
Mounting the Access Point
Cisco Aironet 1815m series access points can be mounted in several configurations – on a suspended
ceiling, on a hard ceiling or wall, or in the plenum air space above a suspended ceiling. You can mount
the AP on an electrical or network box.
When mounting the AP in the plenum air space or above a suspended ceiling, it should be
Note
mounted on a vertical wall or with the face of the AP (having the status LED) directed
downwards.
The standard mounting hardware supported by the AP is listed in
Table 1
Bracket and Clips for Mounting the AP
Part Number
Bracket
AIR-AP-BRACKET-8
Clips
AIR-AP-T-RAIL-R
AIR-AP-T-RAIL-F
AIR-CHNL-ADAPTER
10
Powering the Access Point
The AP can be powered using only Power-over-Ethernet (PoE), from:
• a network device supplying PoE power of 802.3af Class 0 or greater.
• Cisco power injectors AIR-PWRINJ5 or AIR-PWRINJ6.
14
Description
Mounting bracket for ceiling and wall. See
Ceiling Grid Clip (Recessed mounting)
(This is the default option)
Ceiling Grid Clip (Flush mounting)
Optional adapter for channel-rail ceiling grid profile.
Table
1.
Figure
3.