Cisco Cisco Aironet Wireless LAN Client 시작하기 매뉴얼 - 페이지 14

{카테고리_이름} Cisco Cisco Aironet Wireless LAN Client에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Cisco Aironet Wireless LAN Client 38 페이지.
Cisco Cisco Aironet Wireless LAN Client에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (12 페이지)

페이지 인쇄

Cisco Cisco Aironet Wireless LAN Client 시작하기 매뉴얼

Mounting the Access Point

Cisco Aironet 1815m series access points can be mounted in several configurations – on a suspended

ceiling, on a hard ceiling or wall, or in the plenum air space above a suspended ceiling. You can mount

the AP on an electrical or network box.

When mounting the AP in the plenum air space or above a suspended ceiling, it should be

Note

mounted on a vertical wall or with the face of the AP (having the status LED) directed

downwards.

The standard mounting hardware supported by the AP is listed in

Table 1

Bracket and Clips for Mounting the AP

Part Number

Bracket

AIR-AP-BRACKET-8

Clips

AIR-AP-T-RAIL-R

AIR-AP-T-RAIL-F

AIR-CHNL-ADAPTER

Powering the Access Point

The AP can be powered using only Power-over-Ethernet (PoE), from:

• a network device supplying PoE power of 802.3af Class 0 or greater.

• Cisco power injectors AIR-PWRINJ5 or AIR-PWRINJ6.

Description

Mounting bracket for ceiling and wall. See

Ceiling Grid Clip (Recessed mounting)

(This is the default option)

Ceiling Grid Clip (Flush mounting)

Optional adapter for channel-rail ceiling grid profile.

Table

Figure