Cisco Meraki MR78 Manual de instalación - Página 14
Navegue en línea o descargue pdf Manual de instalación para Punto de acceso inalámbrico Cisco Meraki MR78. Cisco Meraki MR78 16 páginas. Dual-band enterprise wi-fi 6 cloud-managed access point
Imprimir páginaSecure the MR78
Depending on your mounting environment, you may want to secure the MR78 to its mount location. If the MR78 has
been installed using the mount cradle, it should be secured via security screw included with mount cradle.
Security Screw
Install the security screw in the lower mount cradle tab.
Verify Device Functionality and Test Network Coverage
1. Check LEDs
a. The Power LED should be solid green (or blue, if clients are connected). If it is flashing blue, the firmware is
automatically upgrading and the LED should turn green when the upgrade is completed (normally within a
few minutes). See the
b. Note: Your MR78 must have an active route to the Internet to check and upgrade its firmware.
2. Verify access point connectivity
a. Use any 802.11 client device to connect to the MR78 and verify proper connectivity using the client's web
browser.
3. Check network coverage
4. Confirm that you have good signal strength throughout your coverage area. You can use the signal strength meter
on a laptop, smart phone, or other wireless device.
IP67 Rating
The MR78 is IP67 rated if Dow Corning DC 4 (or equivalent) is applied as shown below:
"LED
Indicators" section for more details. .
14