- ページ 14

無線アクセスポイント Cisco Meraki MR78のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco Meraki MR78 16 ページ。 Dual-band enterprise wi-fi 6 cloud-managed access point

ページを印刷する

Secure the MR78

Depending on your mounting environment, you may want to secure the MR78 to its mount location. If the MR78 has

been installed using the mount cradle, it should be secured via security screw included with mount cradle.

Security Screw

Install the security screw in the lower mount cradle tab.

Verify Device Functionality and Test Network Coverage

1. Check LEDs

a. The Power LED should be solid green (or blue, if clients are connected). If it is ﬂashing blue, the ﬁrmware is

automatically upgrading and the LED should turn green when the upgrade is completed (normally within a

few minutes). See the

b. Note: Your MR78 must have an active route to the Internet to check and upgrade its ﬁrmware.

2. Verify access point connectivity

a. Use any 802.11 client device to connect to the MR78 and verify proper connectivity using the client's web

browser.

3. Check network coverage

4. Conﬁrm that you have good signal strength throughout your coverage area. You can use the signal strength meter

on a laptop, smart phone, or other wireless device.

IP67 Rating

The MR78 is IP67 rated if Dow Corning DC 4 (or equivalent) is applied as shown below:

"LED

Indicators" section for more details. .