Cisco Codec C Series Manual de introducción - Página 25

Navegue en línea o descargue pdf Manual de introducción para Sistema de conferencias Cisco Codec C Series. Cisco Codec C Series 35 páginas. Telepresence conference system
También para Cisco Codec C Series: Manual de introducción (41 páginas), Manual del usuario (44 páginas), Manual de introducción (32 páginas), Manual de introducción (42 páginas), Manual de introducción (46 páginas)

Cisco Codec C Series Manual de introducción
Cisco TelePresence Systems
GettinG started Guide
Table of contents
Introduction
remote control and on-screen menu
Setting the system/codec password
You need a username and password to sign in to the web
and command line interfaces of your system.
The video conference system is delivered with a default
user account with username
admin
and no password set.
This user has full access rights to the system.
NOTE: We strongly recommend that you set a password for
the
admin
user to restrict access to system configuration.
Make sure to keep a copy of the password in a safe
You have to contact your Cisco representative if you have
forgotten the password.
The system/codec password cannot be set using the
remote control and on‑screen menu. This has to be done
via the web interface.
1. Sign in to the web interface with your username and
current password.
If a password is not currently set, use a blank
password.
2. Go to the
Maintenance
tab and select
3. Enter the
Current
password, the
New
repeat the new password in the appropriate input fields.
The password format is a string with 0–64 characters.
4. Click
Change
password.
D14639.04 Video Systems Getting Started Guide (TC4.2) | 2011 JULY | © 2011 Cisco Systems, Inc. All rights reserved.
User interfaces
Setting the Administrator Settings menu
password
When starting up the system for the first time the
Administrator Settings menu password is not set.
NOTE: We strongly recommend that you define a password
to protect the Administrator Settings menu, since these
settings affect the behavior of the video conference system.
place.
1. Go to
Home > Settings > Administrator Settings > Set
menu
password.
On the remote control, press the # key to toggle
between lower or upper case characters and numbers:
abc/ABC/123.
2. Enter the menu password. The password you enter is
hidden; each character is replaced with a star (*).
3. Select Save to save the changes, or Cancel to leave
without saving.
Current
4. Press
Home
Change
Password.
password, and
Configuration
Configuration
Appendices
(
)
to exit.
25
www.cisco.com