Cisco MX Series Manual de introducción - Página 17
Navegue en línea o descargue pdf Manual de introducción para Sistema de conferencias Cisco MX Series. Cisco MX Series 33 páginas. Telepresence video systems
También para Cisco MX Series: Manual de introducción (41 páginas), Manual de introducción (34 páginas), Manual de introducción (42 páginas), Manual de introducción (46 páginas)
Imprimir página
Cisco TelePresence Video Systems
Introduction
Date, time and location
(When not set by a provisioning system)
We recommend you check that the date and time settings
are correct when you set up your video conference system.
The system uses this information for example to time stamp
messages transmitted to gatekeepers and other network
elements.
If you are changing a value setting,
you have to always click
save
to confirm the change.
D15318.02 Video Systems Getting Started Guide CE8.1, APRIL 2016.
User interfaces
Web interface
Web interface
1. Go to
Setup
settings from the left column.
2. Select your preferred date format in the
down list.
3. Select your preferred time format in the
down list.
4. Select your time zone in the
5. Open the
6. Under the
Mode
drop down list.*
a. If you select
the
Address
b. If you select Off, you have to enter the time and date
manually using either the Touch controller (
> Administrator > Date, Time &
command line interface (xCommand Time DateTime
Set) .
7. To verify the time settings, go to
Open
Time
* NTP mode:
Auto: The time is regularly updated using an NTP server. The NTP server
address is automatically obtained from the network (DHCP).
Manual: The time is regularly updated using an NTP server. You must
manually enter the NTP server address.
Off: You must set the time manually. The time is not updated automatically.
On-screen setup assistant
tab and select Configuration. Open the
DateFormat
TimeFormat
Zone
drop down list.
NetworkServices
settings from the left side bar.
NTP
section select Auto,
Manual
or
Off
Manual,
enter the NTP server address in
input field.
Settings
Location) or on the
Setup
and click Status.
status from the left side bar.
17
Touch
Time
drop
drop
in the
Copyright © 2016 Cisco Systems, Inc. All rights reserved.
Getting Started Guide
Appendices