Cisco MX Series Manual de introducción - Página 18
Navegue en línea o descargue pdf Manual de introducción para Sistema de conferencias Cisco MX Series. Cisco MX Series 33 páginas. Telepresence video systems
También para Cisco MX Series: Manual de introducción (41 páginas), Manual de introducción (34 páginas), Manual de introducción (42 páginas), Manual de introducción (46 páginas)
Imprimir página
Cisco TelePresence Video Systems
Introduction
Passphrase
You need a user name and a passphrase to sign in to the web
and command line interfaces of your system. You also need the
system passphrase to access the administrator and advanced
settings on the Touch controller.
The video conference system is delivered with a default user
account with the user name
admin
and no passphrase set. This
user has full access rights to the system.
NOTE:
Initially, no passphrase is set for the default
It is mandatory to set a passphrase for any user with ADMIN
rights in order to restrict access to system configuration. This
includes the default admin user.
A warning, saying that the system passphrase is not set, is
shown on screen until you set a passphrase.
Make sure to keep a copy of the passphrase in a safe place.
You have to factory reset the unit, if you have forgotten the
passphrase.
D15318.02 Video Systems Getting Started Guide CE8.1, APRIL 2016.
User interfaces
Web interface
Web interface
Set the system/codec passphrase
NOTE:
We strongly recommend that you set a passphrase for
the
admin
user to restrict access to system configuration.
1. Click your user name in the upper right corner, and select
Change
2. Enter the
admin
user.
repeat the new passphrase in the corresponding input
fields.
The passphrase format is a string with 0–64 characters.
If a passphrase is not currently set, use a blank
passphrase.
3. Click
Change
On-screen setup assistant
passphrase.
Current
passphrase, the
New
passphrase, and
passphrase.
18
Touch
Current
Copyright © 2016 Cisco Systems, Inc. All rights reserved.
Getting Started Guide
Appendices