Sony 2005 SXRD KDS-R50XBR1 Manual de desmontaje - Página 16

Navegue en línea o descargue pdf Manual de desmontaje para TV Sony 2005 SXRD KDS-R50XBR1. Sony 2005 SXRD KDS-R50XBR1 31 páginas.

Imprimir página

Access & Removal of Q -Box & PD-Board (cont.)

PD-Board

Lift clamps

Disconnect

Gently flip

up Tan Tab

(Digital Module Block DMB )

Q-Box

Assembly

Screws

Tabs

Wire Protector

(under wires)

Heat-sink

Pads

Disconnect

LVDS

Disconnected

i-Link

6. Q-Box & PD-Board Removal

The Q-Box assembly and the

PD-Board (HDMI) can now be

access and removed.

To remove the PD-Board

remove 2 screws, squeeze the

2 white tabs, and disconnect the

2 wires.

Squeeze

side-tabs

LVDS

To remove the Q -Box module first

disconnect the CableCard ribbon

cable.

Remove 2 white cable clamps that

hold down the ribbon cable.

Disconnect the cable from the

CableCard board by lifting the Tan

connector tab.

CAUTION:

Make sure that the blue

heat-sink pads remain in place .

Also insure that black plastic wire

protector remains in place .

Disconnect the LVDS cable located

at the bottom of the Q -Box assembly

under the gray tape .

Disconnect the i-Link cable.