Cisco TelePresence DX70 Manual del usuario - Página 21

Navegue en línea o descargue pdf Manual del usuario para Sistema de conferencias Cisco TelePresence DX70. Cisco TelePresence DX70 40 páginas. Nhs networked use
También para Cisco TelePresence DX70: Manual de instalación (6 páginas), Manual del usuario (48 páginas), Manual de consulta rápida (2 páginas), Manual del usuario (48 páginas), Manual del usuario (33 páginas), Manual del usuario (14 páginas), Manual (43 páginas), Configuración para uso en residencias (3 páginas), Puesta en marcha (2 páginas)

Video Calls

Add Additional Participants to Existing Call

In a call tap Add.

Place the call, in the usual way. You may alter the

Call settings of that call before you place it—see side

D1510418 User Guide

bar for more.

Cisco TelePresence DX70, DX80

Produced: June 2017 for CE9.0

Locate whom to call, in the usual way.

This new call will now be added to the existing

and you have now established a conference.

You may repeat this procedure to the extent

permitted by your video infrastructure.

About Video

Conferences

Your video system network may be

equipped with the capability to initiate

a video conference with several

participants.

The maximum number of participants

supported by your video system will

depend on system configuration and

the video infrastructure. If in doubt,

contact your video support team.

If you want to initiate a video

conference, you must call each

participant one by one.

If you are the one who initiated

the conference you will be able to

terminate the entire conference. The

other participants may only disconnect

themselves from the conference.

Call settings. Those you call may

have video systems with different

bandwidths. You are not constrained

to set all participants to a bandwidth

that all systems support. The Call

rate may be set individually for all

participants in order to provide

everyone with the best quality

available for their system.

"Change

Call Rate" on page

17.