Sony 10001 Manual de instalación - Página 12
Navegue en línea o descargue pdf Manual de instalación para Videocámara Sony 10001. Sony 10001 28 páginas. A/v multiplexer board, a/v demultiplexer board
También para Sony 10001: Manual de instalación (50 páginas)
Imprimir página
1-3. Information of BKPF-106A
1-3. Information of BKPF-106A
1-3-1. Contents
Contents of BKPF-106A are as follows.
.
AVD-11 board
.
Connector panel (CN-1481 board) (1)
.
Operation manual
.
Installation manual
.
Slot number label
1-3-2. Location and Function of Connectors
AVD
SDI IN
AES/EBU OUT
SDI OUT
BKPF-106A
1-3-3. Connectors and Cables
If any connector or cable is connected to the connectors on the connector panel
when installing or servicing, use the connectors or cables listed below or equivalent.
BKPF-106A Connector
Panel Indication
Connector
SDI IN
BNC (75 Z)
AES/EBU OUT
SDI OUT
1-8(E)
(1)
(1)
(1)
(1)
1
2
1
3
2
1
4
2
Matching Connector/Cable
Connector
BNC (75 Z)
BELDEN 8281 cable
1
1
1 SDI IN connector (BNC type):
1
1
Accepts a 4:2:2 component or 4fsc NTSC composite
serial digital video signal on which AES/EBU digital
signals have been multiplexed.
2
2
2
2 Active-through output connector (BNC type):
2
Outputs signal supplied to the SDI IN connector after
its waveform has been shaped.
3
3 AES/EBU OUT connectors (BNC type):
3
3
3
Outputs AES/EBU digital audio signals demultiplexed
from the serial digital signal supplied to the SDI IN
connector.
Connector 1 : 1/2 CH (5/6 CH in group 2, 9/10 CH in
group 3, or 13/14 CH in group 4)
Connector 2 : 3/4 CH (7/8 CH in group 2, 11/12 CH in
group 3, or 15/16 CH in group 4)
4
4
4
4 SDI OUT connectors (BNC type):
4
Normally output the signal supplied to the SDI IN
connector after an EDH process. The output signal
contains the multiplexed audio signal as-is.
Connectors 1 and 2 output the same signal.
Sony Part No.
1-560-069-11
_
BKPF-105A/205/205R
BKPF-106A/206/206R