Sony 10001 설치 매뉴얼 - 페이지 12

{카테고리_이름} Sony 10001에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony 10001 28 페이지. A/v multiplexer board, a/v demultiplexer board
Sony 10001에 대해서도 마찬가지입니다: 설치 매뉴얼 (50 페이지)

페이지 인쇄
Sony 10001 설치 매뉴얼

1-3. Information of BKPF-106A

1-3. Information of BKPF-106A
1-3-1. Contents
Contents of BKPF-106A are as follows.
.
AVD-11 board
.
Connector panel (CN-1481 board) (1)
.
Operation manual
.
Installation manual
.
Slot number label

1-3-2. Location and Function of Connectors

AVD
SDI IN
AES/EBU OUT
SDI OUT
BKPF-106A

1-3-3. Connectors and Cables

If any connector or cable is connected to the connectors on the connector panel
when installing or servicing, use the connectors or cables listed below or equivalent.
BKPF-106A Connector
Panel Indication
Connector
SDI IN
BNC (75 Z)
AES/EBU OUT
SDI OUT
1-8(E)
(1)
(1)
(1)
(1)
1
2
1
3
2
1
4
2
Matching Connector/Cable
Connector
BNC (75 Z)
BELDEN 8281 cable
1
1
1 SDI IN connector (BNC type):
1
1
Accepts a 4:2:2 component or 4fsc NTSC composite
serial digital video signal on which AES/EBU digital
signals have been multiplexed.
2
2
2
2 Active-through output connector (BNC type):
2
Outputs signal supplied to the SDI IN connector after
its waveform has been shaped.
3
3 AES/EBU OUT connectors (BNC type):
3
3
3
Outputs AES/EBU digital audio signals demultiplexed
from the serial digital signal supplied to the SDI IN
connector.
Connector 1 : 1/2 CH (5/6 CH in group 2, 9/10 CH in
group 3, or 13/14 CH in group 4)
Connector 2 : 3/4 CH (7/8 CH in group 2, 11/12 CH in
group 3, or 15/16 CH in group 4)
4
4
4
4 SDI OUT connectors (BNC type):
4
Normally output the signal supplied to the SDI IN
connector after an EDH process. The output signal
contains the multiplexed audio signal as-is.
Connectors 1 and 2 output the same signal.
Sony Part No.
1-560-069-11
_
BKPF-105A/205/205R
BKPF-106A/206/206R