Cisco TelePresence SX20 Manual del usuario - Página 34

Navegue en línea o descargue pdf Manual del usuario para Sistema de conferencias Cisco TelePresence SX20. Cisco TelePresence SX20 37 páginas. In-room control on touch 10
También para Cisco TelePresence SX20: Juego rápido (8 páginas), Manual de introducción (41 páginas), Manual de introducción (42 páginas), Manual de consulta rápida (2 páginas), Juego rápido (2 páginas), Manual de consulta rápida (2 páginas), Manual del usuario (34 páginas), Manual del usuario (29 páginas), Manual de solución de problemas (37 páginas), Manual de cumplimiento de la normativa e información de seguridad (9 páginas), Manual de instalación (8 páginas), Manual del usuario (38 páginas), Manual de instalación (2 páginas), Manual del usuario (2 páginas), Manual de consulta rápida (2 páginas), Manual (45 páginas), Manual (45 páginas), Hoja de instalación (2 páginas), Manual de instalación (2 páginas), Manual del usuario (34 páginas), Manual del usuario (5 páginas), Manual del usuario (38 páginas), Manual del usuario (38 páginas), Manual de introducción (42 páginas), Manual de referencia (8 páginas), Manual de introducción (46 páginas)

Cisco TelePresence SX20 Manual del usuario
Camera Control

Move the Selfview PiP

1
With self-view activated or a layout involving
a picture-in-picture, navigate to Layout in
the upper right corner and press OK on the
remote control. The Layout icon will appear
only when relevant.
4
Use the Cursor keys on the remote control
to move the image. Press OK when finished.
D1509716 User Guide
Cisco TelePresence SX10, SX20
Produced: September 2018 for CE9.5
All contents © 2010–2018
Cisco Systems, Inc. All rights reserved.
2
The layout menu will now appear. Press
the down Arrow of the Cursor keys on the
remote control to navigate to the self-view
image.
5
The image on the screen will then assume
its original size with the selfview in its new
position.
3
The self-view image will now turn blue to
show that it has been selected. Click OK
on the remote control. Arrows will now
appear to indicate that the self-view image
can be moved. Possible new locations are
indicated.

Why Move the Selfview?

Selfview shows what others see
from your video system. You will
normally use it to confirm that they
see what you want them to see.
The selfview appears as a PiP
(Picture-in-Picture).
From time to time you may want
to have the selfview activated
during the meeting. This could, for
example, be to ensure that you
remain seen on the screen.
It may happen that the current
position of the selfview blocks
important parts of the image on your
screen. You may therefore want to
move it.
34