Sony BVP-900 Series Manual de instrucciones - Página 12
Navegue en línea o descargue pdf Manual de instrucciones para Videocámara Sony BVP-900 Series. Sony BVP-900 Series 48 páginas. Color video camera
Imprimir páginaLocation and Function of Parts
!¡ CURSOR STORE button
Press to store the size and position of the box cursor.
Note
If the CURSOR ON button is not lit, the data cannot be
stored.
!™ CURSOR ON button
Press and light up this button to display the box cursor
on the viewfinder screen. Press this button again and
make the button go out, and the box cursor disappears.
!£ CURSOR (cursor memory) 1, 2, and 3 buttons
Press one of these buttons with the CURSOR STORE
button blinking, and the size and position of the box
cursor displayed on the viewfinder screen is stored.
Three different box cursor settings can be stored using
these buttons. You can recall the stored size and
position of the box cursor by merely pressing the
corresponding button.
Note
When the CURSOR 1, 2, or 3 button is lit, the H-
POSI, V-POSI, WIDTH, and HEIGHT controls are
disabled.
!¢ CALL button
• Press to call the operator of the CCU-700A/700AP,
RCP-700-series unit, or MSU-700. The red tally
lamp on the CCU-700A/700AP lights if it is not lit,
and goes out if it is lit. The CALL button of the
RCP-700-series unit, and MSU-700 lights, and
buzzer sounds.
This button lights when the CALL button on the
RCP-700-series unit or MSU-700 is pressed.
• When using the BVP-900/900P as a stand-alone
camera, this button functions as the start/stop button
for the VTR.
!∞ PinP (Picture-in-Picture) switch
Used to display a small picture on a viewfinder screen.
POSITION: The position of the subscreen moves
each time you move the switch from ON to this
position.
ON: Enters PinP mode.
When neither the RET 1 or RET button is
depressed, you can monitor the camera's signal on
the viewfinder screen and the last selected return
video signal on the small picture. Press either the
RET 1 or RET button to switch the pictures on the
viewfinder screen and the small picture.
OFF: The subscreen does not appear.
10 (E)
!§ VF DETAIL (viewfinder detail) control
Adjusts the amount of detail of the picture on the
viewfinder screen when the VF DETAIL switch is set
to ON. This has no effect on the output signal of the
camera.
Note
The viewfinder detail control function has no effect on
a return video signal and a picture on a subscreen of
Picture-in-Picture function.
!¶ VF DETAIL (viewfinder detail adjustment)
switch
ON: Emphasizes the contours of the image on the
viewfinder screen. When the switch is set to this
position, you can adjust the amount of detail using
the VF DETAIL control.
OFF: Disables contour emphasis.
!• MENU SELECT knob
For menu item selection and value setting on the
viewfinder screen.
For menu operations, refer to the System Manual.
!ª MENU SELECT switch
ENTER: Activates the selection made by the MENU
SELECT knob.
CANCEL: Cancels the selection made by the MENU
SELECT knob and restores the previously selected
menu item.
For menu operations, refer to the System Manual.
@º DISPLAY switch
Used to display the status of the switch settings,
automatic adjustment items, and results on the
viewfinder screen.
ON: The display function is enabled.
OFF: The display function is disabled.
MENU: A menu for setting the displaying items and
functions appears.
For menu operations, refer to the System Manual.