Sony BVP-900 Series Manuel d'utilisation - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sony BVP-900 Series. Sony BVP-900 Series 48 pages. Color video camera

Imprimer la page

Location and Function of Parts

!¡ CURSOR STORE button

Press to store the size and position of the box cursor.

Note

If the CURSOR ON button is not lit, the data cannot be

stored.

!™ CURSOR ON button

Press and light up this button to display the box cursor

on the viewfinder screen. Press this button again and

make the button go out, and the box cursor disappears.

!£ CURSOR (cursor memory) 1, 2, and 3 buttons

Press one of these buttons with the CURSOR STORE

button blinking, and the size and position of the box

cursor displayed on the viewfinder screen is stored.

Three different box cursor settings can be stored using

these buttons. You can recall the stored size and

position of the box cursor by merely pressing the

corresponding button.

Note

When the CURSOR 1, 2, or 3 button is lit, the H-

POSI, V-POSI, WIDTH, and HEIGHT controls are

disabled.

!¢ CALL button

• Press to call the operator of the CCU-700A/700AP,

RCP-700-series unit, or MSU-700. The red tally

lamp on the CCU-700A/700AP lights if it is not lit,

and goes out if it is lit. The CALL button of the

RCP-700-series unit, and MSU-700 lights, and

buzzer sounds.

This button lights when the CALL button on the

RCP-700-series unit or MSU-700 is pressed.

• When using the BVP-900/900P as a stand-alone

camera, this button functions as the start/stop button

for the VTR.

!∞ PinP (Picture-in-Picture) switch

Used to display a small picture on a viewfinder screen.

POSITION: The position of the subscreen moves

each time you move the switch from ON to this

position.

ON: Enters PinP mode.

When neither the RET 1 or RET button is

depressed, you can monitor the camera's signal on

the viewfinder screen and the last selected return

video signal on the small picture. Press either the

RET 1 or RET button to switch the pictures on the

viewfinder screen and the small picture.

OFF: The subscreen does not appear.

10 (E)

!§ VF DETAIL (viewfinder detail) control

Adjusts the amount of detail of the picture on the

viewfinder screen when the VF DETAIL switch is set

to ON. This has no effect on the output signal of the

camera.

Note

The viewfinder detail control function has no effect on

a return video signal and a picture on a subscreen of

Picture-in-Picture function.

!¶ VF DETAIL (viewfinder detail adjustment)

switch

ON: Emphasizes the contours of the image on the

viewfinder screen. When the switch is set to this

position, you can adjust the amount of detail using

the VF DETAIL control.

OFF: Disables contour emphasis.

!• MENU SELECT knob

For menu item selection and value setting on the

viewfinder screen.

For menu operations, refer to the System Manual.

!ª MENU SELECT switch

ENTER: Activates the selection made by the MENU

SELECT knob.

CANCEL: Cancels the selection made by the MENU

SELECT knob and restores the previously selected

menu item.

For menu operations, refer to the System Manual.

@º DISPLAY switch

Used to display the status of the switch settings,

automatic adjustment items, and results on the

viewfinder screen.

ON: The display function is enabled.

OFF: The display function is disabled.

MENU: A menu for setting the displaying items and

functions appears.

For menu operations, refer to the System Manual.