Cisco TelePresence SX20 Manual de referencia - Página 2

Navegue en línea o descargue pdf Manual de referencia para Sistema de conferencias Cisco TelePresence SX20. Cisco TelePresence SX20 8 páginas. In-room control on touch 10
También para Cisco TelePresence SX20: Juego rápido (8 páginas), Manual de introducción (41 páginas), Manual de introducción (42 páginas), Manual de consulta rápida (2 páginas), Juego rápido (2 páginas), Manual de consulta rápida (2 páginas), Manual del usuario (34 páginas), Manual del usuario (29 páginas), Manual de solución de problemas (37 páginas), Manual de cumplimiento de la normativa e información de seguridad (9 páginas), Manual de instalación (8 páginas), Manual del usuario (38 páginas), Manual de instalación (2 páginas), Manual del usuario (2 páginas), Manual de consulta rápida (2 páginas), Manual del usuario (37 páginas), Manual (45 páginas), Manual (45 páginas), Hoja de instalación (2 páginas), Manual de instalación (2 páginas), Manual del usuario (34 páginas), Manual del usuario (5 páginas), Manual del usuario (38 páginas), Manual del usuario (38 páginas), Manual de introducción (42 páginas), Manual de introducción (46 páginas)

Cisco TelePresence SX20 Manual de referencia
Cisco TelePresence SX20/SX80 Reference Guide
Ensure that the power cable is
1
plugged into the power outlet in
the wall.
Confirm that the network cable
2
is plugged into the network outlet
in the wall. The network cable
must be plugged into a dedicated
OTN network outlet.
3
Verify that the power bar is
turned on. The power bar
supplies the whole system, and
you can turn off your system here
at the end of your session.
4
Ensure that the monitor is on.
5
Check that the codec/camera
is on by checking the LED light at
the front of the codec.
6
Pick up the remote control and
unmute your videoconferencing
sound by pressing the "Mic Off"
button on the remote control.
7
Turn the Self view on by
navigating to the camera icon
using the remote control arrows
and selecting the thumbtack icon.
March 2023 | pg. 2