Cisco 2600 Series Manual de instalación - Página 11

Navegue en línea o descargue pdf Manual de instalación para Hardware de red Cisco 2600 Series. Cisco 2600 Series 22 páginas. Configuring adsl wic to support pppoe clients
También para Cisco 2600 Series: Manual de instalación (12 páginas), Notas de publicación (32 páginas), Configuración (15 páginas), Nota de aplicación (41 páginas), Ficha de datos (6 páginas), Anexo (15 páginas), Visión general (13 páginas), Manual de inicio rápido (2 páginas), Manual (5 páginas)

Chapter 3

Installing the Router

Use 19-inch brackets (shown in

Note

the most stable installation for the chassis.

To wall-mount the chassis:

Attach the brackets as shown in

Step 1

Figure 3-17 Attaching the Wall-Mount Brackets

Attach the chassis assembly to the wall as shown in

Step 2

provide. We recommend the following:

For the best support of the chassis and cables, attach the brackets so that the screws align with a

•

vertical wall stud. (See

the wall when cables are attached.

For the best ventilation of the chassis, mount the chassis with the power supply and fan at the top.

•

Make sure there is clearance between the router and the wall.

OL-2171-02

Figure

3-4) to wall-mount the chassis. The small brackets provide

Figure

3-17.

Figure

3-18.) This position will prevent the chassis from pulling away from

Cisco 2600 Series Routers Hardware Installation Guide

Setting Up the Chassis

3-18, using screws and anchors that you

3-11